FBM’s Exodus Prototype Frame Info & Specs

FatTony

• July 24 2009
• 1,472 views
• 2 comments

FBM just posted all the specs on their new Exodus ST2 prototype frame…\r\n

\r\n\r\n\r\nMore info and photos on fbmbmx.com.\r\n\r\nHere are the specs:\r\n* Integrated Head tube no gyro mounts\r\n* 1-1/4 Supertherm Top Tube\r\n* 4130 3D laser cut Top Tube Gusset\r\n* 1-3/8 Supertherm Down Tube\r\n* 4130 3D laser cut Down Tube Gusset\r\n* Slotted Tube Cable Guide\r\n* Slotted Cable Stop\r\n* Externally machined Seat Tube\r\n* Mid BB\r\n* 5/8OD x 0.049wall 4130 Seat Stays\r\n* Flat plate seat stay bridge\r\n* Chain Stay 990 Mounts\r\n* 3/4taper to 5/8OD 0.049 wall 4130 Chain Stays\r\n* Flat plate chain stay bridge\r\n* 3/16 thick heat treated 4130 dropouts\r\n* Exodus ST Geometry\r\n* Weight: 21″ top tube - 4lbs 10oz (4.6lbs) WITH PAINT\r\n* Top Tubes - 20.5, 21, 21.25\r\n* Rear End Length - 13-7/8\r\n* BB Height 11-5/8\r\n* HT Angle - 74.5\r\n* ST Angle 71\r\n* Standover Height 9