Complete Forks Buyer’s Guide - 28 Forks Spec’d

Bookmark and Share

FatTony

This article has multiple pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Company: Odyssey
Forks: Freestyle
MSRP: $124.99
Material: 4130 chromoly 41 Thermal® construction.
Dropouts: 5mm tapered 4130 chromoly. 3/8 or 14mm slots.
Height: Right
Steerer Tube Length: 170mm
Offset: Normal
Compression Bolt: Patented, Offset 6mm/8mm Aluminum Pre Load
Compression Bolt Tool: 6mm or 8mm Hex
Colors: Any color you want, as long as its RustProof Black
Weight: 2 lbs. 2.5 oz. (uncut steerer tube with pre-load bolt installed)

Other: Brake Mounts

Why are your forks better than others, or what makes them different from others on the market?
“Dramatically stronger then any competitor. Anyone can mill dropouts, taper legs and drill holes to loose weight. Wouldn’t you rather buy forks that are designed by people who know what they are doing? Ten years of 41 thermal and a real lifetime warranty speaks for itself.” - Jim Bauer

Company: Odyssey
Forks: Director
MSRP: $152.99
Material: 4130 chromoly 41 Thermal® construction.
Dropouts: Integrated Hollow 10mm. 4130 chromoly
Height: Right
Steerer Tube Length: 170mm
Offset: Normal
Compression Bolt: Patented, Offset 6mm/8mm Aluminum Pre Load
Compression Bolt Tool: 6mm or 8mm Hex
Colors: RustProof Black, White, Flo Orange, Ocean Blue, Purple Rain and other limited colors
Weight: 1 lbs. 15.6 oz. (uncut steerer tube with pre-load bolt installed)

Other: Offset fork legs.

Why are your forks better than others, or what makes them different from others on the market?
“While the Director Fork may look different from what you are used to, the geometry and feel are an identical match with traditional forks. The axle is in the same position as it would be with a ‘normal’ fork design. The Director’s differences lie in the use of new construction techniques, putting this fork in a league of its own. The steerer tube is connected to the legs by using a joint design that is a substantial improvement over ordinary tubular crown forks.

The legs have been angled forward so the hollow dropouts can blend smoothly into the leg tubing, while also maintaining a “traditional” axle position. By running the legs “directly” from where the load is applied (at the steerer tube), to where it is reacted against (at the wheel axle), the mechanical efficiency has been maximized in this structure. The end result is improved performance and durability.

The dropouts are formed from the leg itself, rather than being a basic welded on plate that is left to “flap in the breeze” like on a conventional fork. This design, combined with a 10mm thickness, makes bent dropouts a thing of the past.  The hollow dropouts are not only dramatically stronger, they are lighter too. Backed by ten years of the best in BMX, 41 Thermal® construction.

While weighing in at less than most “racing specific” chromoly forks, the Director Fork is intended for use with every style of riding.” - Jim Bauer

Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

This website uses IntenseDebate comments, but they are not currently loaded because either your browser doesn't support JavaScript, or they didn't load fast enough.

36 Comments For This Post

Leave a Reply

* Fields required

Share

Users Videos Users Images
Upload your video or image
To upload photos or videos,
you must register and be logged in.